home - shelving - pallet racking - mezzanine floors - lockers and cabinets - barriers & protectors - conveyors - partitioning & suspended ceilings - live & mobile storage - workshop equipment - repair, reconfigure & relocate - buy on-line
  Home Home
Home Home
Pedestrian Barrier System
 
Anti-Collapse Mesh System
 
Protective Barrier Systems
 
Safety Barriers
 
Barrier Protection System
 
Rack Sentry
 
Column Sentry
Click here to jump to the product
Click here to jump to the product
Click here to jump to the product
Click here to jump to the product
Click here to jump to the product
Click here to jump to the product
Click here to jump to the product

Pedestrian Barrier System

A barrier system designed to create safe pedestrian areas both on ground floor and mezzanine floors.

Construction: Vertical posts are rolled steel hollow section mig welded to heavy base plates. Corner posts and rails are rolled steel hollow section with plastic end caps for all exposed areas.
Section and Gauge Fixings
Barrier rail: 40 x 40 x 3mm Rail to posts: M8 x 60mm
RHS vertical posts: 80 x 40 x 3mm Post to concrete floor: M12 sleeve anchor
RHS baseplates: 100 x 180 x 12mm drilled to accept M12 fixings Post to chipboard: M12 nuts, bolts and heavy duty washers
Corner posts: 40 x 40 x 3mm RHS  
Size: Available in heights of 900, 1100, and 1500mm high.
Paint finish: Electrostatically applied powder coated finish in the following colours as standard: RAL 1018 yellow, BS00A05 grey, BS08B17 sandstone. Special colours available if required.

Anti-Collapse Mesh System

A versatile anti-collapse cladding system for cladding areas of pallet racking which face onto a pedestrian aisle. All panels are made to suit bay centres and the system completely eliminates the need for any cutting on site. The system consists of framed mesh panels pre-punched and mounted on to the rear of the pallet racking by means of brackets. The brackets are designed to be fixed either way in order to avoid the main racking beams and also to allow mesh to stand clear of pallets.

Construction: Cold rolled mild steel angle and cold rolled tees with mesh infill sheets, spot welded together. Panels are bolted together using M8 x 20mm bolts and nuts.
Section & Gauge:
Top and bottom angle: 40 x 40 x 1.5mm
Vertical angle: 42 x 38 x 1.2mm
Weld mesh sheets: 50 x 50 x 12 SWG
Standard panels: 2.790 metres width x 1220mm height. 2.790 metres width x 610mm height
Stand off brackets: 40 x 3mm steel strip with stand off size of 150mm or 225mm.
Paint finish: Electrostatically applied powder coated finish in the following colours as standard: RAL 1018 yellow, BS00A05 grey, BS08B17 sandstone. Special colours available if required.

Protective Barrier Systems

A light duty protective barrier system designed to protect racking, shelving and partitioning in warehouses from damage caused by forklift trucks, pallet trucks, etc. Rails are supplied in 3 metre lengths with the standard 600mm high post. The system can be upgraded to medium by using double barrier rails.

Construction: Barrier rail is cold rolled from pre-galvanised mild steel strip, posts are rolled steel hollow section mig welded to mild steel base plates. Corner posts are hot rolled mild steel angle with mig welded cleats to facilitate floor fixing. High visibility plastic end caps are used on terminating ends of the barrier rail.
Section & Gauge
Barrier rails 150mm x 40mm x 3 metres long
Posts 80 x 40 x 3mm x 600mm long
Baseplates 120 x 140 x 10mm
Corner posts 75mm x 75mm x 6mm x 600mm height
Fixings to posts M8 bolts, nuts and washers
Fixings to floor M12 x 80mm sleeve anchor bolts
Paint finish: Electrostatically applied powder coated finish in the following colours as standard: RAL 1018 yellow BS00A05 grey BS08B17 sandstone. Special colours available if required.

Safety Barriers

Strong and highly visible, these heavy duty barriers are excellent for safe guarding entrances and exits from obstructions. Manufactured for strength and durability they are ideal for protecting and segregating areas in and around facilities.

Barrier unit powder coated bright safety yellow. Available with steel mesh infill or open 900 or 1100mm high. Two standard lengths 1200mm or 2400mm. Units supplied with packing shims and fixing bolts .
Corner unit excellent for creating equipment barriers. Each side run 1200mm long 90° corner angle.
Gate unit provides access to protected areas for personnel. Connected to either gate or barrier unit 1100mm gate suitable for some fork truck access.

Barrier Protection System

Troax Barriers is a partitioning protection system, designed to guard against damage by careless or inexperienced fork lift truck drivers.
All of the components for the barrier system are supplied in hot dip galvanised steel for all weather protection.
A sturdy "W" barrier section supplied in two standard lengths supported from 600mm high support posts.
High visibility end caps are also supplied to prevent personnel injury from the metal barrier edges.

Rack Sentry

Design
Minimises the force of forklift truck impact that can easily damage the structural integrity of your racks and floors.
9 pockets strategically placed throughout Rack Sentry are angled to deflect impact energy away from the rack.
A patented air vented system gives continual protection.
Installation
One person can install Rack Sentry in seconds.
Simply position around any upright and fasten the Velcro straps.
Design eliminates need for drilling and mounting onto flooring.
Easy to remove and re-attach should racking be re-located.
Fits all standard European racking uprights.
Protection
Guards the structural integrity of racking & protects expensive stock.
No floor damage upon impact as it is not attached to the floor.
Costs a fraction of rack and floor repair or stock replacement.
Does not stay dented 'pops' back to original shape after impact.
Surrounds uprights protecting them from damage at all angles.

Column Sentry

Design
Minimises the force of forklift truck impact that can damage columns, surrounding supports, vehicles and operators.
24 pockets strategically placed around the column sentry are angled to deflect impact energy away from the column.
flanges, eliminating side slip when hit from any angle.
Installation
One person can install the lightweight Column Sentry in seconds.
Simply position around the column and fasten the hook and loop straps.
Install during original construction or after construction is completed.
No need for clumsy gravel ballast or concrete.
Protection
Guards the structural integrity of your building.
Costs a fraction of column replacement.
A one time 'insurance' investment.
Approximately 1070mm high - easily stackable for greater protection at greater heights.
Pallet Racking, Adjustable Shelving, Drive In Racking, Archive Shelving, Pushback Racking, Mobile shelving, Double Deep Racking, Slotted Angle, Narrow Aisle Racking, Small Parts Storage, Mezzanine Floors, Modular Conveyors, Industrial Partitioning, Gravity Conveyors, Commercial Interiors, Live Storage Systems, Suspended Ceilings, Powered Conveyors, Workbenches, Steel Cabinets, Lockers, Tool Storage Systems.