Partitioning : Double Skin Steel Partitioning
SpecificationPanels are constructed from 25.4 x 42 x 25.4 x 1.2 mm (18g) cold rolled channels panelled both sides with 0.8 mm (21g) CR4 mild steel sheet with 30 mm Rockwool mineral fibre infill and are joined together using an 'H' section, making the installation very similar to the installation of composite partitioning systems. Panels are available in solid, half-glazed, solid/glazed/solid or borrowed light elevation.
Standard panel sizes
Height
Width
Dado Height
Thickness2400, 2700, 3000 mm
1000 mm
1200 mm
47 mmA range of infill and special size panels can be supplied to maintain final dimensions.
Mullion sizes
50 x 50 x 2.5 mm - up to 2700 mm 80 x 40 x 2.5 mm - 2700 mm and above 100 x 50 x 3.0 mm - to suit installation.All Two-Way (intermediate) mullions have base plates for floor fixing. Knee braces and/or ladder mullions may be fitted for extra stability
Standard Door Module Sizes: steel or timber
Side Hung Doors
Double Doors
Slidiing Doorsheight 2022 mm width 1000 mm*
height 2022 mm width 1940 mm*
to suit customer's requirements*Plus overpanel to partition heightDoors can be supplied with single or double glazed vision panels or flush i.e. no vision panel. A full range of non-standard door types, i.e. full height leaves, clear access modules or hospital type leaves are available to order.
Glazing
Pyroshield are supplied as standard. However, other types of glass and Perspex may also be fitted as required.Double glazed panels may be supplied using a 14mm sealed unit with 4 mm toughened glass to both sides and retained in the panel by steel glazing beads.
Paint finish
All panels are electrostatically powder-coated in the following standard colours: Grey 10 A 07, Grey 00 A 05, Sandstone 08 B 17 and Stone 10 B 17. Special colours (over 100 in stock) are available at extra cost.
